Syvecs GT-R AWD/4WD Controller
Introducing the new Syvecs R35GTR AWD module which is a standalone AWD/4WD/Centre Diff controller designed to control any AWD/4WD Solenoid/Motor to a maximum of 30 Amps via pin sharing logic.
OEM designed controllers are locked down and not adjustable, but by simply fitting our AWD Module a whole new level of control is available. The unit allows users to optimise control and provide the best performance available from the powertrain.
The R35GTR version of the controller replicates all the OEM CAN information as well as pick up lots of variable from the OEM Can to link into the control strategies like Steering Angle, Brake Pressure, Rpm, Tps, Lateral G, Yaw, Long G, Speeds, Temperatures and mode switches
The R Mode Button on the R35GTR is used for Map switching so allows users to be able to change between Awd Select 1 & 2 which means all the maps below can be adjusted. You can also enable the burnout mode to be active when Snow mode is active, Hazards are on or if handbrake is present.
The Syvecs AWD Unit also has a dedicated Can bus transmit area where users can send variables from the AWD to external control units for monitoring or to OEM Canbus system via custom Identifiers and byte structuring.
The Syvecs AWD module has the following features:
- 4 x Base Duty Tables
- 4 x Adders with enable maps:
- Left Foot Braking
- Front Slip
- Rear Slip
- Centre Slip
- 4 x Multipliers with enable maps
- Steering Angle
- AWD Temp
- AWD Pressure
- AWD Potentiometer
- Tyre Diameter adjustment under sensors
- 2WD/ Burnout Mode
- Via Dedication Switched input
- Via Can bus Message
- Via OEM Functions
- Limiters
- Maximum Duty
- Launch Control Limit
- Duty Rate of Change
- Decay/Hold Functions
- Limp Mode
- Over Current Protection
- Over Slip Protection
- Over Temp Protection
- Cooling Pump control
- AWD Cooling pump control logic
