BILSTEIN Clubsport

From Bilstein:

Every track is different. The BILSTEIN Clubsport adjusts to every condition with motorsports dynamics.

The BILSTEIN Clubsport suspension kit takes our 50 years of motorsports know-how and transfers it to the open road. A high-end German TÜV approved coilover combined with BILSTEIN monotube technology creates a perfect combination for meeting high performance demands. The 2-way adjustment system allows the seperate configuration of Rebound and compression. Fast turns and extreme situations don’t challenge the chassis any more. Choose the extremly durable BILSTEIN quality, tested in the “Green Hell”, the Nürburgring-Nordschleife.

Bilstein Technologies:

BILSTEIN gas-pressure technology

Traditional oil shock absorbers, when put under extreme stress, can lead to oil foaming which causes shock fading and results in damping power reduction. In the 1950s BILSTEIN found the solution to this problem by developing gas-pressure technology. With the first installation of the monotube gas-pressure shock absorber on series produced Mercedes-Benz vehicles in 1957, we established the technology as an industry standard — a standard which continues today in both monotube and twin-tube designs. This means more reliable shock absorption and suspension under any load, and added safety in dynamic driving situations.

BILSTEIN monotube / Upside-Down technology

BILSTEIN monotube gas-pressure shock absorbers were the first in series production and have remained the equipment of choice for those who demand the most from their vehicle. Whether driving in poor driving conditions, sporty driving, or competitive motorsports, our monotube technology provides greater damping power due to the larger surface area of the piston. This results in improved handling, consistent performance, and longer service life. Increased installation flexibility allows engineers to find the optimum mounting position. BILSTEIN also uses upside-down monotube technology which allows the piston rod to be installed at the bottom of the shock tube body. A wear-resistant chromium tube moves up and down freely by incorporating low friction bearings. Both the support and lateral forces are distributed across a larger area than in twin-tube systems, and the torsional strength of the connection between the wheel and vehicle body is increased.

BILSTEIN lifting & fits lift kits

Our shock absorbers for lowered and lifted vehicles, paired with proper springs, ensure enhanced driving characteristics while still achieving your desired look. Our ride height adjustment kits are thoroughly tested by BILSTEIN engineers. Only when we are 100% satisfied that all criteria have been met (driving characteristics, suitability for everyday use, appearance, ground clearance, etc.), will the kit be branded with BILSTEIN.

BILSTEIN 2-way adjustment

Providing a wide range of suspension characteristics, BILSTEIN 2-way damping adjustment is a comprehensive solution for the motorsports enthusiast. Both rebound and compression forces can be adjusted independently via two easily accessible knobs. From 1 (soft) to 10 (hard), BILSTEIN 2-way adjustment allows for up to 100 variations with noticeable differences.

BILSTEIN OE quality

If the designation original equipment did not exist, it would have to be invented for us. For more than 60 years, we have been the development partner of choice for the suspension and shock absorber systems of renowned automakers — manufacturers in the premium segment as well as high-volume manufacturers. From the development of suspension components for series production to high-performance suspensions for motorsports or the production of high-quality OE replacement, our products and expertise are in high demand. Our comprehensive product range with high market coverage and availability includes everything — from OE replacement to tuning and motorsports. This is how we ensure the legendary BILSTEIN driving experience during the entire vehicle life.

BILSTEIN road test

All BILSTEIN shock absorbers undergo rigorous testing and measurement procedures for objective criteria including safety, braking, steering behavior, dynamic driving, and comfort. In addition, BILSTEIN never loses focus on the most important aspect of suspension design — how it feels to the driver. All of our high-performance shock absorbers, air suspension modules, and coilover systems undergo a rigorous testing program at various locations throughout the world including, the famed Nürburgring, our own Papenburg Test Center in Germany, and on an array of demanding trails and roads in Southern California, USA. Only when all of our test engineers agree that the optimum level of performance is achieved, may the products be branded with the BILSTEIN name — a name synonymous with a legendary driving experience.

BILSTEIN Clubsport Features and Benefits:

• Separate configurations for rebound and compression: Red for rebound, blue for compression
• 100 setting variations that can be manually selected and experienced with tangible differences
• Aluminum adjusters are easy-to-read and scale from 1 (soft) to 10 (hard)
• Simple set-up changes without additional tools
• Camber adjustment with aluminum uniball support bearings for optimal cornering stability
• Weight and installation space advantages thanks to integrated reservoir
• Extremely resilient design includes quality sport springs made of high-strength material, and spring seats and lock rings made of a special aluminum alloy
• Allows further customization for use in racing
• Made in Germany