KW Variant 1 “inox-line”
Sporty handling combined with outstanding
looks. With factory pre-configured
damping.
The KW coilover kit Variant 1
“inox-line” is our entry model for more driving pleasure with an
attractive and individually adjustable lowering. Due to its
high-quality finish, the use of struts made from stainless steel,
corrosion resistant springs and bump stops as well as compatible
components stands for long driving pleasure – not just the car’s
life.
Continuous lowering
With the KW coilover Variant 1 you can achieve
maximum lowering in the tested adjustment range. Depending on
vehicle model this varies between 30 to 70mm or 50 to 90mm. Even
after years you can adjust the height quickly and easily due to the
dirt resistant trapezoid thread and composite collar. Lowering at
the front axle is made using our one piece composite height
adjuster, on the rear axle this is the same unless the car has a
seperate spring and shock absorber. The supplied rear height
adjuster sits either above or below the rear spring.
The benchmark for tuning fans
KW coilover Variant 1 “inox-line” satisfies the
sporty driver with its harmonic basic setup. Our engineers develop
for each vehicle a specific damper setup and spring rate to
increase the driving pleasure with optimal balance of sportiness
and practicality. In the end, you don’t buy any coilover, but a KW
coilover which has been developed specifically for your type of
vehicle. KW as a manufacturer uses only its own resources, high
quality components and the same damper technology as high-volume
manufacturers. With the KW coilovers Variant 1 “inox-line”, rolling
motions of the body will be reduced during compression and you
benefit from genuine directness and sportier handling while
driving.
Trust In Our Experience
We are the market leader and innovator of individual
suspension solutions for road and racetrack for more than 15 years.
No matter where in the world, car driver, automotive manufacturers
and tuners rely on our KW coilovers “Made in Germany”. Each KW
coilover kit, developed and manufactured in the Swabian town
Fichtenberg, is subject to extensive stress tests during production
to meet the high standards of our KW quality management. Of course,
we give as a German manufacturer a 2-year warranty on our more than
4600 applications suspension solutions, which exceed OEM quality.
The warranty will increase up to 5 years when the kit has been
installed at one of our KW specialist dealers.
– Optimally pre-adjusted
– Sporty and comfortable dampening technology
– Stainless steel technology “inox-line”
– Individually height adjustable
– tested adjustment range
– Ready to install complete solution
– High quality components for a long durability
– Complete documentation for easy handling
Setup – Factory pre-configured damping
setup
The KW coilover Variant 1 “inox-line” has a
vehicle-specific, fixed configured damper setup. The spring and
damper match perfectly, so that you will experience an optimized
balance of sportiness and comfort while driving.
Even with full load and maximum axle loads, the dampers always work
with a sporty characteristic. Tuning fans whose focus are “Show &
Shine” events are interested in the KW Variant 1
“inox-line”.
